Thursday, January 16, 2020

Men vs. Men Women: Nature or Nurture Essay

It’s amazing how men ad women can be considered the same but yet be so very different. On the outside they may look alike- two eyes, two ears, a nose, mouth, hands, and so on, but they could not be more different. So the saying goes, â€Å"men are from Mars and women are from Venus†. The question is why though? Is it because of nature or because of nurture? One difference is that men are extremely more aggressive than women due to higher testosterone levels. It was believed that how your raise the child and the role of society were the main factors that determined the outcome as male or female. However, with the case of David Reimer this proved to not be true. David was going through a routine circumcision when he was eight months old that went terribly wrong. Doctors decided to turn him into a girl as an experiment, to prove that reassigning a sex was easy because nurture determined their psychological make-up. However, today being thirty-seven years old, the angry David is proof of how wrong they were. He had a tortured childhood, and has had to go through many surgeries to try to gain back his manhood. The biological sex of a child will always prevail, now matter how they are raised. Though aggression is due to testosterone in men, it is not the only reason. The aggression in men is further implied in he way they are raised and how society teaches them to act. From childhood, boys are taught to be tough- to â€Å"be a big boy† and not cry. They are taught that boys should play sports like football, wrestling, and other violent sports. Men relate to each other through physical interaction. For men, words are less important in developing relationships; they are all about taking action. Our society teaches men to think that â€Å"actions speak louder than words†. On the other hand, women do relate with words. One of the most important things to a woman in a relationship is being able to talk about problems. Women care more about the thoughts and feelings behind the action. Emotional intimacy, and closeness, is the most important goal. Being honest and open is what shows love. Though the case with David Reimer shows that you can’t change the biological sex of a child, a child could pick up some characteristics of the opposite  sex. For example, if a girl, with multiple brothers, is raised by her father with no mother figure around, things such as football and fighting would be of more interest to her, and she would be considered a ‘tomboy’. She would want to be one of the guys. Men and women are different in many more ways than the obvious physical ones. I believe that the differences are both nature and nurture, and that you can’t have one without the other. However, I do believe that a majority of the difference depends on nurture, due to the fact that society today has set so many standards as how men and women should act. â€Å"ED and Intimacy† http://www.allabouted.com/english/relationships/intimacy.html â€Å"Boys Will Be Boys: Nature vs. Nurture†. Ninemsn, 60 minutes. Copyright 1997-2003 http://sixtyminutes.ninemsn.com.au/60/stories/2000_05_07/story_158.asp

Wednesday, January 8, 2020

Control System Algorithm

Sample details Pages: 12 Words: 3672 Downloads: 7 Date added: 2017/06/26 Category Statistics Essay Did you like this example? Executive Summary Introduction/Background Traditionally development of microprocessor based control systems involved the following steps. The control algorithm was designed by a systems or a control engineer. The algorithm would then be coded in programming languages like assembly, C or C++ which would be implemented on a microprocessor based hardware the controller. The problem with this method was the verification of the algorithm would be possible only once the whole system was developed. Any errors in design would prove extremely costly. Also in converting control logic specification into software there is a high probability of translation errors that would lead to erroneous results. Don’t waste time! Our writers will create an original "Control System Algorithm | Engineering Dissertations" essay for you Create order mModel Based Design is a software methodology which addresses these issues and is gaining a lot of popularity currently in the industry. The scope of this project is to apply the Model Based Design methodology to develop a control algorithm that eases the parallel parking of a car problem for a novice driver. Aims and Objectives The aim of this project is to develop a parallel parking system using Model Based Design. The objectives are to understand the parallel parking problem and methods to solve it, steps involved in Model Based Design and explore the possibility of implementation of a parallel parking algorithm on a Lego Mindstorms Robotics Kit. Acheivements A fuzzy logic based parallel parking algorithm was successfully simulated. Model Based Design concepts were explored and implemented in the design. Programs developed in Simulink were successfully tested on the Lego Mindstorms KIT using Real Time Workshop Embedded Coder, EC Robot Toolbox, nxtOSEK and other associated tools. Conclusions/Recommendations The parallel parking strategy implemented did show good results. However, real life scenarios may be different than the one discussed. For example, the controller depends on wall following. This implies there has to be 3 sides closed in a gap for the parking controller to work. The development of the algorithm was with the intent of being able to execute it on a Lego Mindstorms Kit. However, there were some issues regarding this. The main being lack of a floating point unit on the NXT Brick. Though it is possible to execute floating point programs on the NXT, it causes severe performance issues. The controller developed used the fuzzy logic blockset which inherently uses a lot of floating point variables. One method to overcome this draw back could be developing a fixed point version of the fuzzy logic blockset. Other parking strategies involving classical control could be experimented with Lego Mindstorms. Complex tasks like path planning could be executed on a computer communicating with the NXT via Bluetooth and the control tasks could be implemented on the NXT using fixed point math. Introduction Problem Description The parallel parking manoeuvre of a car has been a topic of academic and industry interest. The car or a car-like mobile robot hence referred to as CLMR has inherently a constraint known as a nonholonomic constraint. This is problem can be summarised as follows (Pushkin Kachroo and Patricia Mellodge, 2004.). If a system has restrictions on its velocity, but those restrictions does not cause restrictions in its positioning the systems is said to be nonholonomically constrained. Viewed in another way, the systems local movement is restricted, but its global movement is not. Mathematically, this means that the velocity constraints cannot be integrated. For e.g. during a parallel parking manoeuvre, when a driver arrives next to a parking space, he cannot simply slide his car sideways into the spot. The car is not capable of sliding sideways and this is the velocity restriction. However by moving the car backward and forward and turning the wheels the car can be moved into the parking space. Ignoring the restrictions caused by the external objects the car can be located at any position with any orientation, despite the lack of sideways movement (Pushkin Kachroo and Patricia Mellodge, 2004.). The challenge in this project is to not only address the parallel parking problem but also to develop it using advanced software design techniques involving Model Based Design Literature Survey The parallel parking problem can be viewed as a subtask of robot motion planning and control. There is has been considerable research in this area. De Luca et al (1998) classifies all robot motion tasks into 3 subtasks as follows. Point-to-point motion: The robot must reach a desired goal configuration starting from a given initial configuration. Path following: The robot must reach and follow a geometric path in the Cartesian space starting from a given initial configuration (on or off the path). Trajectory tracking: The robot must reach and follow a trajectory in the Cartesian space (i.e., a geometric path with an associated timing law) starting from a given initial configuration (on or off the trajectory) A parallel parking problem can then considered as a point to point motion task or a path following task and a feedback control law if proposed for the same. (Dongbing and Huosheng 2000) have developed more advanced control strategies involving Generalized Predictive Control and Neural Networks based predictive control. Fuzzy Logic based controllers have also been used to solve the parallel parking problem. Shih-Jie and Tzuu-Hseng (2002) proposes a rule base based on the distance of the CLMR edges to the parking spot. Kuang-Yow et al (1999) proposes a fuzzy sliding mode controller to solve the parallel parking problem. Holve and Protzel (1996) suggest another fuzzy logic based controller and a parking algorithm based on human experience. It involves finding an appropriate space for parking, stopping at the right place, executing the parking procedure and to do so without colliding with any obstacles. Summary The classical control methods discussed above are generally more complex compared to other ones. Most of them rely on trajectory generation and then a control algorithm for trajectory tracking or path following. The success of the algorithm in a real time implementation also depends upon the accuracy of the positioning systems which increases the complexity and the hardware cost of this method. While the fuzzy logic based controllers are more intuitive and easier to design the performance is suboptimal compared to the classical controllers. But they are more robust to sensor uncertainties (Holve, R. Protzel, P. 1996). The goal of this project is to develop a parallel parking algorithm suitable for implementation on a Lego Mindstorms robotics kit. Being able to solve the parallel parking problem and take this design rapidly from concept to implementation is the motivation behind this project. Parallel Parking of a Car like Mobile Robot (CLMR) Introduction The following chapter discusses the kinematics model of a CLMR and investigates a feasible parking strategy using a fuzzy logic based controller. Kinematic Model of a CLMR The kinematic model of a CLMR is as shown (Shih-Jie and Tzuu-Hseng 2002).The model assumes that the car wheels are in contact with the ground at all time i.e. no slip exists. : is a mid point on the rear axle of the car : is mid point on the line joining the front wheels : is the angle between the X axis with respect to the vehicle frame : is the steering angle with respect to the vehicle frame : is the distance between the front and rear axle The non-holonomic constraint equation is given by (2.1) The equation of the rear wheel is given by (2.2) (2.3) (2.4) The relationship between the rear and the front wheels are given by And (2.5) (2.6) The above equations are useful while finding the future positions of the CLMR. The physical layout of the CLMR is a three wheeled one. A three wheel robot and a four wheeled one have the same non- holonomic constraint. A three wheeled robot is chosen here for simplicity. The sensor positions are chosen with the assumption that the parking position is always going to be to the right of the vehicle. 4 ultrasonic sensors are used. 2 sensors (s2 and s1) are placed on the right front and rear edge and the other 2 (s3 and s0) are placed at the front and rear sides of the car as shown in the Fig 2.2. The position of sensors s1 and s2 with respect toand described by the following equations. S1 (2.7) S2 (2.8) The position of the sensors is used to determine the distance of the CLMR from an obstacle during simulation. Parking Strategy The parking strategy is developed intuitively as a human driver would do. The assumption is that a parking spot is somewhere to the right side of the vehicle to be parked (Holve and Protzel,1996). The vehicle would be moving parallel to the line of cars. The algorithm is as follows. Search for an obstacle free area on the right side of the car. The distance should be greater than the minimum distance required to park the car. This could be set at twice the length of the car. Once a sufficiently large parking spot is found, the car is reversed into the gap using a wall following algorithm. This algorithm aligns the car as parallel as possible in the gap without colliding with the rear wall. The car is then driven forward to align itself in the centre of the gap. Steps 2 and 3 can be repeated until the desired position is reached Wall Following Controller (Shih-Jie and Tzuu-Hseng , 2002) The heart of the parking strategy is a wall following controller. Shih-Jie and Tzuu-Hseng (2002) proposes a fuzzy logic scheme as follows. The variables shown in the figure represents the following d1 distance between the rear end of the CLMR and the wall d2 distance between the front end of the CLMR and the wall Dist is the desired distance between the wall and the CLMR The objective of the controller is get d1 equal to d2 which is the desired distance from the wall Dist . The scheme suggested is a 2 input one output scheme which controls the steering angle of the CLMR. Since the CLMR in this project is a three wheeled one the turning is done by varying the speeds of each wheel. The input variables to this control scheme are as follows if the CLMR is moving forward . Input1 = d2 Dist (2.9) Input 2 = d2 d1 (2.10) and if the CLMR is moving backward Input1 = d1 Dist (2.11) Input 2 = d1 d2 The output of the controller is the amount by which the CLMR needs to turn in a given direction. The fuzzy membership functions for Input1, Input2 and Steer are shown below The membership functions are equally divided triangular membership functions. The Rule Base for the wall following is shown in the table below. It is based on sliding mode control (Li et al, 2000) The rules can be an represented linguistically as If (Input1 is Positive Big) and (Input2 is Negative Big) then (steer is Zero) If (Input1 is Positive Big) and (Input2 is Negative Small) then (steer is Positive Small) and so on 25. If (Input1 is Negative Big) and (Input2 is Positive Big) then (steer is Zero) The defuzzication method used here is centre of gravity which is good for fine control The final fuzzy logic entire controller can be summarized as follows Summary With the kinematic equations of the CLMR and the equations describing the sensor positions, a model can be constructed. With the parking strategies and a fuzzy logic controller now developed we shall discuss an efficient methodology in taking these designs into implementation. Model Based Design Methodology Overview The advances in microprocessor technology in the early 70s brought about a change in the way control systems were developed. From electrical relays built into ladder like networks and programmable logic controllers , controllers were being developed around a computer built with adequate hardware and software. Traditionally most of these control software development was based on paper designs and manual programming followed by verification activities such as code inspections and a unit/integration test (Guido Sandmann and Richard Thompson 2008). Many of these activities lack tool automation, and are very time consuming. Thus they are error prone and time consuming. Lack of tool chain integration provides another opportunity for errors to be injected into the software that are often detected late and at high costs to the development process and so involve manual interaction. Model Based Design is software design methodology used to address these issues. The steps involved are in MBD ,some of the commercially available tools and the tool chain choices for this project are discussed below Model Based Design Process The Model Based Design process can be divided into the following steps (NI Developer Zone, 2006). System Definition System definition involves the design process of a particular problem in consideration. It is mostly a conceptual design where in the problem and solutions are analyzed. Modelling Simulation The step implies that the analyzed design is simulated using a graphical based simulation tool. MATLAB-SIMULINK, ASCET-MD etc are some examples of modelling tools. Designs here can be easily changed verified and re designed if necessary. Rapid Prototyping If the hardware of production controller is not available during the design phase a generalized hardware controller maybe used to test some of the simulations. This is the rapid prototyping phase. Targeting Targeting refers to getting the software code executing on the production hardware. This stage involves the use of auto coders tools that generate C code directly of graphical models, cross compilers and other tool chains that facilitate this. Hardware in the loop Testing Hardware in the Loop testing is used while developing control strategies for plant models like engines. It provides real time simulation of a real world plant model. System Testing This is the last step in the design process wherein the controller is tested on the real plant. Summary Of the stages in Model Based Design discussed above, only the most relevant one will be applied to this project. Beginning with system definition, modelling simulation proceeding to targeting and finally onto system testing will be the stages followed in this project. MATLAB/SIMULINK, Stateflow, Virtual Reality Toolbox, Fuzzy Logic Blockset would be the tools used for modelling and simulation while Real Time Workshop Embedded Coder would be used during targeting. A detailed list of other tools will be dealt in the next chapter. Introduction Lego Mindstorms NXT is a robotics kit which consists of mechanical building blocks and electronic sensors. The highlight of this kit is the programmable brick called the NXT. The NXT is a 32bit ARM7 based microcontroller which allows motors and electronic sensors to be easily interfaced .Users can also run custom programs written via a GUI based programming language. The language provided by Lego, though very simple and intuitive to use does not exploit the true potential of NXT. Over the years, advanced users of the Lego Mindstorms have been successful in creating custom tools that apply every imaginable concept of embedded systems. The following chapter discuss some of these software tools and hardware details relevant to this project. The most important part of this is to be able to design , simulate and test the robot using MATLAB Simulink. Ultrasonic Sensor The Lego Ultrasonic Sensor is shown below. It is mainly used for distance measurement. It has a range of 255 cm and is accurate to about +/- 3cm One of the tasks of Model Based Design is to be able to program the NXT from Matlab Simulink environment. The tools required to automate this process are discussed below John Hansens Enhanced Firmware Firmware in embedded systems term is referred to the basic software that is initially run on a hardware device. It performs basics factions like initialization of devices , integrity checks on memory and so on similar to BIOS on a standard PC. The NXT brick , out of the box , has a standard firmware installed. This is designed to be used with the software provided. In order to write programs in C and realize the true potential of the NXT, a custom firmware has been written by John Hansen. This allows the NXT to be programmed by either using the provided software or by programming in C and using other tools which will be explained later. The NeXTTool The NeXTTool is a program that allows communication between the host PC and the NXT brick. It can do various tasks, but most importantly it is used to download custom programs onto the NXT. The nxtOSEK nxtOSEK (previously known as LEJOS OSEK) is an open source real time operating system for LEGO MINDSTORMS NXT. It contains device drivers from leJOS NXJ, an open source program that allows users to write Java programs on the NXT and a real time operating system source know as a TOPPERS OSEK. C or C++ can be used to write custom programs and compiled with the nxtOSEK using the GCC tool chain (Takashi Chikamasa, 2008) The Embedded Coder Robot NXT Blockset is one of the key elements in applying Model Based Design Techniques to the Lego Mindstorms NXT. These blocks are custom Simulink blocks used in the controller side and serve as inputs and outputs to the real world. A word of caution. Custom blocks especially hardware related blocks behave different behaviour in simulation and code generation . For e.g. an ultrasonic sensor block will not directly give sensor readings. The behaviour of the ultrasonic sensor will have to be separately emulated. During code generation process, a function call to the ultrasonic device is placed where the block is used. This ensures the program using the block gets the value directly from the sensor. The details of the blocks used for this project are discussed below There are two blocks that have to be for an ultrasonic sensor blocks consist of two blocks. The Ultrasonic Sensor Interface block and the Ultrasonic Sensor Read block. Servo Motor Blocks Fig 4.5 Servo Motor Blocks The working of the Servo Motor is similar to the ultrasonic block as explained above. The details of the block are given below. Data Type int32 Dimension [1 1] Data Range 0 to 255 [cm], -1 (the sensor is not ready for measurement) Port ID S1/S2/S3/S4 Summary Tools concerning with the implementation of a Matlab Simulink design on a Lego Mindstorms NXT were explored here. However the most important of all is to simulate a working design. The next chapter discusses the implementation of the parallel parking strategy and the simulation results. Parallel Parking Simulation An integral part of Model Based Design is being able to simulate and get the desired results before implementation. The following chapter discusses the results of the controller developed in Chapter 2. For verification of the controller a Simulink model developed by Takashi Chikamasa, (2006) was used. The model was of a 3 wheeled robot with the motor dynamics included. A 3-D environment was provided using the Virtual Reality Toolbox. The environment however has been changed to suit the parallel parking problem. Parallel Parking Strategy The controller algorithm was developed in Simulink using Stateflow and the Fuzzy Logic Toolbox. A 2-D plot of the trajectory path traversed by the CLMR is shown below. Conclusion and Recommendations The parallel parking strategy implemented did show good results. However, real life scenarios may be very different. For example, the controller depends on wall following. This implies there has to be 3 sides closed in a gap for the parking controller to work. The development of the algorithm was with the intent of being able to execute it on a Lego Mindstorms Kit. However, there were some issues regarding this. The main being lack of a floating point unit on the NXT Brick. Though it is possible to execute floating point programs on the NXT, it causes severe performance issues. The controller developed used the fuzzy logic blockset which inherently uses a lot of floating point variables. One method to overcome this draw back could be developing a fixed point version of the fuzzy logic blockset. Other parking strategies involving classical control could be experimented with Lego Mindstorms. Complex tasks like path planning could be executed on a computer communicating with the NXT via Bluetooth and the control tasks could be implemented on the NXT using fixed point math. However, with Model Based Design, being able to write programs in Simulink, simulate it and be able to execute this on the Lego Mindstorms opens a whole new dimension of what can be done ; limited only by our creativity! Bibliography C., Ho, C., Lin, S. Li, T. (2005). Omni-Directional Vision-Based Parallel-Parking Control Design for Car-Like Mobile Robot. Proceedings of the 2005 IEEE International Conference on Mechatronics, 562-567. De Luca, A., Oriolo, G., and Samson, C. 1998. Feedback control of a nonholonomic car-like robot. In Robot Motion Planning and Control, ed. J.-P. Laumond, 171-253. Berlin: Springer-Verlag Dongbing, G. and H. Huosheng (2000). Wavelet neural network based predictive control for mobile robots. Systems, Man, and Cybernetics, 2000 IEEE International Conference on. Galijasevic, A. M. a. Z. (2006). Model-Based Design Shortens Development Time of Motor Control Applications. Embedded Technology Journal. Guido Sandmann and Richard Thompson (2008). Development of AUTOSAR Software Components within Model-Based Design. The Math Works, Inc. Holve, R. Protzel, P. (1996). Reverse Parking of a Model Car with Fuzzy Control. Proceedings of the 4th European Congress on Intelligent Techniques and Soft Computing EUFIT96, 2171-2175 Kuang-Yow, L., C. Chian-Song, et al. (1999). Parallel parking a car-like robot using fuzzy gain scheduling. Control Applications, 1999. Proceedings of the 1999 IEEE International Conference on. Li, T.-H. S. and Shieh, M.-Y. (2000). Switching-type fuzzy sliding mode control of a cart-pole system, Mechatronics 10, 91-101. NI Developer Zone (2006). Shortening the Embedded Design Cycle with Model-Based Design, Sep 6, 2006. Available from World Wide Web: https://zone.ni.com/devzone/cda/tut/p/id/4074 Pushkin Kachroo and Patricia Mellodge (2004). Mobile Robotic Car Design, McGraw-Hill, Shih-Jie, C. and S. L. Tzuu-Hseng (2002). Design and Implementation of Fuzzy Parallel-Parking Control for a Car-Type Mobile Robot, Kluwer Academic Publishers. 34: 175-194. Takashi Chikamasa, (2006). Embedded Coder Robot NXT Demo. Dec 2006. Available from World Wide Web: https://www.mathworks.com/matlabcentral/fileexchange/loadFile.do?objectId=13399 Takashi Chikamasa, (2008). What is nxtOSEK? June 2008. Available from World Wide Web: https://lejos-osek.sourceforge.net/whatislejososek.htm Yanan, Z., E. G. Collins, et al. (2003). Design of genetic fuzzy parallel parking control systems. American Control Conference, 2003. Proceedings of the 2003.

Monday, December 30, 2019

What Is Wrong With Our Educational System Of Today

America, the land of opportunity, the land of differing opinions. Our great nation has, once more, slipped into the thoughts and practices of yesteryear. With the common core state standards and the educational reform movement in general, the entire country needs to take a giant step back and look at the issues we are faced with. How did we get to this point? What do we do now? Through explanation of the history of education, the common core, and possible outcomes of these standards, I will hope to answer the big question; what is wrong with our educational system of today? Humble Beginnings American education has always been in a stumble-and-fall situation. In the early 19th century, we were only beginning to grasp the idea that we needed more consistent schools, no matter where or who the students were. In the 1800’s America was growing exponentially, both geographically and governmentally; the civil war started and ended, we saw the start of the industrial revolution, and we saw the rise of many different forms and levels of education. All of these political and economic changes weighed heavily on America, which reinforced the fact that education is vital to a growing nation. According to â€Å"Your Introduction to Education†, the school system that we see today has it’s roots in the common schools of the 19th century (Powell 204). Horace Mann was the mastermind behind this reform and urged people to support schooling for all children, not just wealthy white males. With theShow MoreRelatedEducation And The Intellectual Era Of Enlightenment1398 Words   |  6 PagesThe educational system that we have today was built in the intellectual era of enlightenment. Our educational system hasn’t changed since then and no one has complained about it before or made a new educational system to propose. Our educational system today is mainly about math and English which limits the creativity for a student to want to do something else with his life then count numbers or read books. When children are placed in kindergarten they tend to have more creativity then older onesRead MoreThe Adaptable and Progressive Nation of the United States935 Words   |  4 Pagesmost people would agree that our nation is an adaptable nation. Over the years, the United States has adjusted to account for groups of people with a lack of rights such as colored minorities, females , and homosexuals. This country has tailored laws and altered how to operate economically and globally. As I do more research, I become increasingly frustrated with the state of the United States. My frustration is a byproduct of the failure in the educational system to progress and acclimatize justRead MoreJean Jacques Rousseau Critique1360 Words   |  6 Pagesnegative education (Entwistle in Bayley, 89) describes many valid concepts which are still applied in todays educational system. Although his philosophy is reasonable in terms of its ideas, his contradictions make it such that it would be difficult to apply realistically as pedagogy. Rousseau was a French philosopher of the eighteenth century, he argued that children should not be told what to learn, instead t hey should learn for themselves through experiences and his pedagogies of negative educationRead MoreEssay What Went Wrong With Americas Schools?1500 Words   |  6 Pages What Went Wrong with Americas Schools? nbsp;nbsp;nbsp;nbsp;nbsp;Education is the key to any countries economic success. For a country to be economically sound, the business and industry within that country must be financially prosperous. In todays high tech world economy, businesses and industries need well educated employees to prosper. Therefore, the deterioration of a countries educational system should be considered a major economic problem. Between 1965 and 1980, the performance ofRead MoreIs Education A Good Thing?1358 Words   |  6 PagesIs education in our society today well rounded enough to prepare students for a successful future for themselves? â€Å"It’s time to educate the whole person, not just follow regulations and exam pathways† (Robinson.) We can all agree that having an education is a good thing, but can we really say that formal education, is really allowing a student to achieve their full potential? The system works great for information seekers, and it doesn’t really acknowledge the people who are creative, and the outRead MoreA Report On K12 Education1001 Words   |  5 Pagesrole and importance of education in our life. Starting when we were young, we have come to believe that having a proper education can lead us to better opportunities later in life. Education is planted like a seed at a very young age, and like any seeds, I believe that it is best taken c are of when it is still in the process of growing. Unfortunately, I believe that there are some policies in our educational system that need immediate attention to ensure that our future generation gets an effectiveRead MoreAn Analysis of William Edward Burghardt Du Bois Proposed Education System to the Prevalent System1085 Words   |  4 Pagescharacters and builds personalities, introvert and extrovert, pessimistic and optimistic, loving and aggressive. For a better society an improved educational system is a must, a system based on ethics and knowledge. The paper examines the work and educational principles of W.E.B. Dubois and then compares his proposed system to the currently prevalent educational system. Introduction William Edward Burghardt Du Bois is one of the greatest African Americans in history. He was born, 23rd February 1868 inRead MoreThe Code Of The Honor Code1303 Words   |  6 Pageswithin the society, especially in the educational system; however, similar to the way we enforce rules to improve the students’ actions, we must provide standards that ethically better the students. By forming our own perspective on the honor code, acknowledging that the efficiency of the honor code relies on the student bodies’ compliance to the expectations, and relating the honor code to free will, we have come to the conclusion that the present honor code in our school, Robert Vela High School, needsRead MoreThe American Education System Is Broken And Outdated1398 Words   |  6 Pageshave gone through the public school system at some point or another. Many have gotten their entire education through this medium. So, if so many of our populace is educated by public schools we would expec t that everyone within this institution would get a first rate schooling, right? That we would be giving our children the best education that money can buy? Of course, knowing our government, that dream will stay just that: a dream. The American education system is broken and outdated and we needRead MoreThe Fallacy Of Public Education1580 Words   |  7 Pageslearn by force or harshness; but direct them to it by what amuses their minds, so that you may be better able to discover with accuracy the peculiar bent of the genius of each.† -Plato For the last several decades, there has been a great return to homeschooling. Many families have seen the need to remove their children from the public education system for a variety of reasons: for religious grounds, because of a decline of morals in the public system, or to give their children an education where they

Sunday, December 22, 2019

How A City Teenager Good - 1692 Words

1 is â€Å"Footloose†. This movie is an upbeat, pop, classic musical Good 2 released in 1984. This movies soundtrack reached the number Good 3 chart on April 21, 1984. It stayed number one until June 30, Good 4 until June 30, 1984. This movie is about how a city teenager Good 5 Taylor-Corbett. She is a director, chorographer, composer, Good 6 chorographer, composer, and lyricist. She was born in Good 7 born in Denver, Colorado and works in film and theatre (most Good 8 (most notably, creating the choreography for the 1984 dance Good 9 â€Å"Footloose†). Corbett also choreographs for some dance Good 10 dance companies, both modern and ballet, and is the principal Good 11 Carolina Ballet. She choreographed the dance â€Å"Great Galloping Good†¦show more content†¦He is an American Good 24 as a guitarist. He is known for soft rock music beginning Good 25 in the 1970s, and later was known for writing and performing Good 26 in the 1980s. Thomas Righter Snow was born in 1947 in Good 27 in Princeton, New Jersey and is an American songwriter. Good 28 American songwriter. James Richard Jim Steinman was born on Good 29 on November 1, in New York City, NY. He is an American Good 30 American composer, lyricist, and Grammy Award-winning record Good 31 many hit songs. He has also worked as an arranger, pianist Good 32 as an arranger, pianist and singer. The composers worked Good 33 released on March 23, 1984 (Sweden). The movie was directed by Good 34 Herbert Ross. This movie was based off of a true story Good 35 in Elmore City. Although there were some creative liberties Good 36 with the movie, it is based on the real life fight between Good 37 where they lived. Dancing wasn’t allowed in the city of Elmore. Good 38 city of Elmore. The class of 1980 at Elmore City High School Good 39 on the matter. The students won with a vote of 3 to 2 in Good 40 rebellious spirit. It’s a classic tale of a teenage rebellion Good 41 and repression, which features a pleasant combination of Good 42 performances. Footloose† is set in a small, Middle Western Good 43 set in a small, Middle Western religious town where bopping Good 44 strictly forbidden. Into this slightly isolated climate comes Good 45 punk haircut. Although Ren tries

Saturday, December 14, 2019

Sub Level Caving Free Essays

Sublevel caving techniqueSimplicity and low cost are the essence SUBLEVEL CAVING TECHNIQUE SIMPLICITY AND LOW COST ARE THE ESSENCE Author: Partha Das Sharma, B. Tech(Hons. ) in Mining Engineering, E. We will write a custom essay sample on Sub Level Caving or any similar topic only for you Order Now mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 1. Introduction – Sublevel caving is usually carried out when mining of the orebody through an open pit method is no longer economically feasible. Mining now proceeds underground, underneath the open pit. At first, both a raise and a network of tunnels are made. At different sublevels, jumbos are used for long hole drilling, drilling directly upwards into the roof. These holes are then charged with explosives and blasted. As the roofs cave in, the rock from the ground surface will cave in to the underground as well. Scoop trams or Load Haul Dump (LHD) vehicles transport the muck, loosened rocks, to an ore pass where the rocks are lifted to the surface. Drilling and blasting takes place at different underground levels of the mine at the same time. As the blasted rock, muck, is continuously transported to the ore pass, more blasting will encourage the roof to cave in to the void and further into the drift. This is repeated until blasting, caving and transporting depletes the entire orebody. 2. Modern day Sublevel caving – The sublevel caving technique, as the method is applied today, the whole quantity of ore between the different sublevels is broken using ——————————————————————————————————Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 1 Sublevel caving techniqueSimplicity and low cost are the essence controlled drilling and blasting. Sublevel caving is in many respects simple. It can be used in orebodies with very different properties and it is easy to mechanize. In sublevel caving, ore is developed from a series of sublevels spaced at regular intervals throughout the orebody. Mining begins at the top of the orebody. A series of ring patterns is drilled and blasted from each sublevel. Broken ore is mucked out after each blast and the overlying waste rock caves on top of the broken ore. This technique is inexpensive, highly mechanized and yields a large amount of muck. It is normally used in massive, steeply-dipping orebodies with considerable strike length. Since dilution and low recoveries are unavoidable, sublevel caving is used to mine lowgrade, low-value ore-bodies. However, studies are going on in various levels to eliminate the shortcoming of the system. The designs which are used and the measures which can be taken to eliminate the disadvantages are less understood. Possibly the modern version of the method was developed in the iron mines of Sweden. Over the past few years, the scale of sublevel caving has increased markedly with LKAB being a leader in this regard. Today, with the continuing push to increase mining scale, a fundamental question is whether the gravity flow principles which served as the design basis for the small-scale sublevel caving mine designs of the past can be applied at much larger scales or whether some other approach is required. In fact, in design and operating practices, sublevel caving is among the most advanced of all mining methods. Sound engineering is indispensable to its conduct. The reason is related to the complexity of the caving action and the necessity of controlling it. The increased sublevel interval requires diligence in drilling, loading and blasting practices. The advent of improved drilling technology has made increased sublevel intervals possible in the sublevel cave mine. Hydraulic tube rod drill rigs have made long ——————————————————————————————————- 2 Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ Sublevel caving techniqueSimplicity and low cost are the essence up-holes accurate with less than 2% deviation. Apart, blasting pattern used has also plays very important role. Proper fragmentation and blasting efficiency is evaluated by measuring the percentage of muck which is able to pass the designated blast size. 3. Description of sublevel caving method – An underground mining method used in large, steeply dipping orebodies where the wall rock is of an incompetent nature. Parallel drives are developed in the ore on equally spaced levels. The ore is then drilled and blasted using longholes between levels, often in a circular or fan pattern, on retreat. The weight of the rock is used to assist breakage. The upper levels are mined ahead of lower levels. Broken ore is extracted from the drive before the next blast takes place. The wall rock caves in when the ore is extracted. As discussed, in sublevel caving, the hanging wall is allowed to cave in as the ore is drilled, blasted and removed. The wall caving is induced by mining the ore in controlled sequence, usually from hanging wall to footwall and from top to bottom. Sublevel caving is often used in conjunction with surface mining. Sublevel caving extracts the ore via sublevels, which are developed in the orebody at regular vertical spacing. Each sublevel features systematic layout with parallel drifts, along or across the orebody. In the wide orebody, sublevel drifts start from the footwall drive, to continue across, reaching the hanging wall. In the orebody lesser width, sublevel drifts are branched off in both directions, from a centre crosscut drive. ——————————————————————————————————Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 3 Sublevel caving techniqueSimplicity and low cost are the essence Development volume to prepare sublevel caving is extensive, compared to other mining methods. However, development is mainly drifting to prepare sublevels. Drifting is a simple and routine job for the mechanised mine. Development of sublevels is done efficiently, in an environment of multiple faces on one sublevel available to drill rigs and loaders. A ramp connection is needed to connect different sublevels, and communicate with main transport routes. Ore passes are also required, at strategically locations along sublevels, for LHD-loaders to dump ore from sublevels, to be collected and transported on the haulage level below. —————————————————————————– ————————Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 4 Sublevel caving techniqueSimplicity and low cost are the essence Lon ghole rigs drill the ore section above the drift, in a fan spread pattern. Longhole drilling is a procedure which is done independent of other jobs, often well ahead of charging. Thus, drilling and charging-blasting longholes can be timed to suit the mine’s production schedules. Blasting on each sublevel starts at the hanging wall, mining then retreats toward the footwall. Miners aim the cave to follow an approximately straight front, and adjacent drifts mined at similar pace. A section through the cave to show upper sublevels one step ahead of sublevels underneath. Blasting the longhole fan breaks the ore volume covered by the fan-pattern. As the cave is filled with fractured rock, most of the fresh ore remains in the cave, while some caves into the drift opening. Mucking out with LHD-loaders creates a cave pattern of ore and waste from above. Loading continues until the operator decides that waste dilution is too high, and stops the mucking, and transfers to a nearby drift heading with a fresh cave. In the meantime, the empty heading is occupied by the charging team, to charge next ring of longholes. Ore handling involves mucking out at the cave, transport on sublevels and dumping into ore passes. Waste dilution and ore losses are drawbacks for sublevel caving. Waste dilution varies between 15 and 40%, ore losses from 15 % to 25 %, depending on local conditions. Dilution is of less influence for orebodies with diffuse boundaries, where the host rock contains low grades minerals. Parameters directly influence flow behaviour have been found to include the geometry of the extraction layout and drives, sublevel height, blast ring design, material characteristics of the blasted and waste material, and draw control methodology. In most of the sublevel caving system blasting parameters dominate in association with recovery when compared to drawpoint and geological parameters. Generally, sublevel caving method employs use of fan drilling using long and smalldiameter holes, between sublevels or drill drifts to undercut and blast the ore-zone. An initial slot is developed at the wallrock, and vertical uphole fans are rilled in a diamond pattern from sublevel in sequence. Generally, eight holes, inclined 80 to 85 degrees toward the slot, are drilled. Hole diameter average 51 mm, Burden and Spacing vary from 1. 2 to 1. 8 m and 1. 5 to 1. 8 m respectively. Blasting is performed against broken waste rock as wall rock caves. Generally, specific-charge range from 0. 3 to 0. 4 kg/ton. 4. Below are some salient features of Sublevel caving technique: Application * Weak walls and strong ore preferred though weak ore can be mined too. * Steep dip: A vertical dip is best, while dip60 is fine too. Possibility of loss of ore in non-vertical steep dips Considerable loss of reserves in flat dips * Preferably, the ore and the rock should be easily separable * Surface should be amenable to caving (not an inhabited or the watershed area etc) ——————————————————————————————————Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 5 Sublevel caving techniqueSimplicity and low cost are the essence Development * Significant. Almost 20% of the ore is mine during development * Sublevels are established generally at 7. -12. 2 m vertical intervals and about 10. 7 m horizontal intervals The vertical interval is dependent on the drilling accuracy and the dip of the orebody The horizontal and vertical spacings affect the eccentricity of the cave * The size and shape of the production drift affects the draw Drift should be as wide as possible Should give good support to the back and the brows If the back is arched, the draw is mostly at the center and none on the sides If the back has to be arched for ground support, the drifts should be closer Ore remnants left behind (due to being out of reach of LHD’s) increase with height. Therefore, drift height should be as small as possible (usually about 3-3. 2 m). * Slot raises are driven at the hanging wall end of the production drift all the way up to the next level * Haulage levels driven in waste In wide orebodies, transverse layouts may be used (ore widths should be 12-15 m) Here, the production drifts are perpendicular to the strike Recovery better than longitudinal layouts Haulage drift in waste (footwall), about 9 m from ore contact. This distance is maintained so that blasting does not occur too close to it. Diamond drilling is done to obtain ore boundaries so that the haulage drift is neither too close nor too far away. o o * Ramps may be driven at 15 -18 , to production levels to provide access * Long, fan holes drilled 70-80 degrees forward (about 8 holes Production totaling 100 m in a ring) * Side holes, if drilled, should be steeper than 70 degree Side holes reduce length of holes driven up from the level below If flat holes drilled to the sides, however, the blasted material from the side holes cannot be extracted from the working level. Therefore, the neighboring fan hole blasted material does not get enough room to expand * Brows should be supported if necessary If brows collapse, ore floods the drift and covers some rings Also, the loader has problems loading as the ore does not stack high If brows are uneven, the ore funnels down the high spots ——————————————————————————————————- 6 Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ Sublevel caving techniqueSimplicity and low cost are the essence If sloughing or high brows are noticed from development, it may be decided to blast more than 2 rings just to advance through the area * If drilling is not accurate, a bridge/arch may be left in the stope Re-slotting may become necessary * Powder factor high as blasting is always against blasted muck (almost twice that of blasting against an open face) * LHD’s used for mucking * Good ventilation necessary as all working faces are dead ends * Productivity is quite high (about 36 ton/miner-shift) Comments * High dilution from caved waste. Ore losses occur as well since not all mined ore can be recovered. * Ore/waste flow cannot be predicted accurately prior to mining. * Probably the most economical when mining in weak strata * Development openings are not kept open for the entire life of mine. Once a level is extracted, the development openings are consumed. * Safe, since all mining activities are in small, protected openings. * High degree of mechanization possible. 5. Discussion on ore flow, drilling and blasting for efficient workings: * Fragmentation is of key importance to sublevel cave stope. Proper fragmentation of the ore column resulted in improved efficiency for the other mine operations and was critical to recovery. * Underground observations indicate that the draw-points must be wide enough to account for inconsistent blast results and provide regular flow. * The draw-point width determines the width and flow strength of the central channel which is important to achieving high recovery of the ring. * The middle holes of the ring are fired first and can make first use of the swell volume offered by the underlying sublevel drift. * The central holes are drilled subvertical, fairly parallel, and relatively close to one another. The result is a relatively high and uniform specific charge compared to the other holes in the round. Thus, one would expect the best, most uniform fragmentation. * The ore material in the central part of the round can make the best use of the effect of gravity in directing it to the drawpoint. * All of the material in the fan is drilled and blasted. * Because of the fan geometry, the amount of explosive/unit volume and hence the fragmentation varies throughout the fan. * The ore material in the centre part of the fan and the lower part of the fan has a much higher specific charge than that at the boundaries of the ring. Furthermore, the â€Å"cave† which lies in front of the blasted slice is an eclectic mixture of waste rock and ore remnants. * Its mobility varies with location and with time (it changes with the extraction geometry). —————————————————— ————————————————Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 7 Sublevel caving techniqueSimplicity and low cost are the essence * Finally, most rock materials upon being blasted would like to bulk (swell) of the order of 50%. In sublevel caving, it is the sublevel drift located at the bottom end of the fan which is the primary provider of swell space for the ore in the ring. * It has been observed that, increased amounts of oversize in the ring decreases recovery, proving the importance of proper fragmentation for sublevel cave operation. * Recoveries could be less than 60% if the ring is composed of 30% oversize. The oversize in the draw-point reduces the mobility of the ore, thus preventing high recovery. * Effective blast patterns also take into consideration the amount of benching. High powder factors are also required to reduce benching but may create excessive blast damage and over-break. * Practical solutions, such as, the blast pattern, blasthole size, primer sequencing, powder factor and degree of fragmentation are to be considered in order to be efficient. 6. Design parameters and some preliminary design rules – Design parameters in sublevel caving are largely a function of caving mechanics, the branch of rock mechanics related to the breakage and collapse of consolidated materials in place and their flow downward by gravity. Although, the ore has to be drilled and blasted, the overlying rock comprising capping or hanging wall is undercut and caves. Extremely careful controls must be exercised in drawing the ore to avoid excessive dilution. Draw control is the practice of regulating the withdrawal of ore in the sublevel crosscuts so as to optimize the economics of draw. Preliminary design rules: * Sublevel drift size (width (Wd) and height (Hd): determined based on equipment. * Sublevel interval (HS): the theoretical maximum value is based on the ability to drill long, straight holes. This, in turn, is based on the hole diameter (D). The actual limit is based on recovery and dilution considerations which are due to managing ore/waste pulsation. * Hole diameter (D): based on the available drilling equipment and the ability to charge long holes. * Spacing of the sublevel drifts (Sd): Sd = (2. 4 to 2. 7) Wd * Ring spacing (Burden B): Based upon the damage radius (Rd): B = 2 Rd Where: Rd/rh = 20 ( Peexp/PeANFO)? ( 2. 65/? rock)? ? Rd = damage radius (m); rh = hole radius (m); Peexp = explosion pressure for the explosive; PeANFO = explosion pressure for ANFO = 1600 MPa; ? ock = rock density (g/cm3); 2. 65 = density of typical rock (g/cm3). * Hole toe spacing (ST): based upon the burden ST = 1. 3 B. * Spacing for parallel holes (SP): based upon the burden SP = B. * Front inclination: 70–80 degrees (forward). Example: If it is assumed that: D = 115 mm; Drift dimensions: 7 m wide by 5 m high; Explosive: emulsion (Pe Exp = 3900 MPa); Rock density = 4. 6 g/cm3; Suble vel interval: 25 m based on drilling ability and control of pulsation. ——————————————————————————————————Author: Partha Das Sharma, E. ail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ 8 Sublevel caving techniqueSimplicity and low cost are the essence One finds that the remaining dimensions are: Sublevel drift spacing: 17–19 m; Burden: 2. 7 m; Toe spacing (fanned): 3. 5 m; Toe spacing (parallel): 3 m; Front inclination: 80 degree selected. 7. Experience from LKAB, Sweden – Sub-level caving (SLC) is an important mass mining method, used at LKAB. The caved rock or debris at the SLC interface reduces the fragmentation and the swelling of the blasted ring and it dissipates the explosive energy. These phenomena may immobilize the blasted ring, causing ore losses. There are two major factors that influence the mobilization of the blasted ring, fragmentation and swelling of the blasted material. The caving process is influenced by also the stiffness of the waste rock, which is dependent in some way by the compaction that the blast ring contributes to. By using the acoustic impedance between the blasted material and the confining debris, a relationship for both fragmentation and compaction have been found depending on material, specific charge and physical properties of the debris. Regression analysis has been used for both tasks, where the two statistical hypotheses clearly have good agreement with actual data i. e. the prediction models can forecast both the fragmentation and compaction for this set-up with reasonable accuracy The results can be comparable with confined blasting in large scale, this both that it have representative design parameters that fulfil in many ways the scaling laws and the second is that it can be linked to other comparisons between large-scale and small-scale, where the similarities have been shown. LKAB’s Malmberget – The Malmberget mine consists of about 20 orebodies, of which ten are currently mined. Most of the deposit consists of magnetite ore, but non-magnetic hematite also occurs. The present main level of the Malmberget mine is at a depth of 1000 meters. About 14 Mt of crude ore is extracted from the orebodies each year. Development – The first stage of mining is drift development. A drift is a tunnel that is driven into the rock. Development involves construction of new areas of the mine where ore can be extracted. A development project begins with construction documents prepared by the mine planning department. Each year, the mine planning department orders development work on the basis of the forecast demand for products as well as current knowledge of the status of the orebody. A development drift goes right through the orebody. Drifts are driven with electrichydraulic drill rigs. For each charge, as many as 60 holes are drilled. Each hole is about 5 meters deep. When all the holes are drilled, they are charged with explosives. The charge is blasted at night. The loose ore is then hauled out by a front loader. This procedure is repeated until the entire development drift has been driven. The drifts can be up to 80 meters long. If necessary, the walls and ceiling of the drift are reinforced with rock bolts and/or shotcrete. When development is complete, i. e. , when several drifts have been driven in the same area, the next stage of mining can begin; namely, production drilling. ——————————————————————————————————Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. ordpress. com/ 9 Sublevel caving techniqueSimplicity and low cost are the essence Production drilling – Slices of ore are drilled up with remote-controlled production drilling rigs. From their control rooms, the operators (drillers) operate sever al drill rigs out in the production areas via remote control. The rig drills upwards into the ore, forming fan-shaped patterns of holes. There are 10 drill holes in each series. They are normally about 40-45 meters deep. The holes are straight, so that subsequent charging with explosive and blasting can be done efficiently. When a pattern of holes has been drilled, the rig is moved back three meters, then drilling of the next pattern begins. About 20 of these patterns will be drilled in an 80-meter drift. Once drilling is completed in the entire drift, the holes can charged with explosive. Blasting – A robot injects explosive into the drill holes in one pattern. The explosive is manufactured by LKAB’s own explosives company. Blasting is done every night. Each round brings down about 10,000 tonnes of ore. When the blast has been ventilated, loading with wheeled loaders can begin. Then, the next pattern is charged, etc. The procedure is repeated until the entire drift has been mined out. 8. Conclusion – Caving methods have become the underground bulk mining methods of choice and expected to continue in the foreseeable future. The growing popularity of caving methods around the world is largely due to the very low production cost and the intrinsic safety associated with this mining approach. It is often the only viable mining method for some of the lower grade massive orebodies that are becoming too deep for open pit mining. Caving of strong rock masses has ecome accepted practice even though there are still some challenges to be resolved. Strategically, most medium and large mining companies are operating or planning to operate a caving mine. Codelco’s El Teniente mine in Chile and the LKAB Kiruna Mine in Sweden are among the largest and most famous caving operations in the world. Australia’s leading caving operations include Rio Tintoâ₠¬â„¢s Northparkes mines, BHP Billiton Nickel West’s Perseverance Mine and Newcrest’s Telfer and Ridgeway gold mines. References: * Kvapil, R , â€Å"Subleve l Caving†, Underground Mining Methods Handbook. â€Å"d Edit ion, Vol. 2. , H. L. Hartman, ed. , SME. Littleton, CO, 1992, p. 1789. * Geddes, P. J. , â€Å"Swedish Drilling and Blasting Practice†, Trans. Int. Min. Metail. , 1 986, Sect. A. , V. 95, p. 204-207. * Alatalo. R. , Heden, H. and Ronnback, L. , ‘large Scale Sublevel Caving in LKAB Malmberget Mine†, Proc. Int. Sym. Large Scale Underground hfining, Nov. 1985, V. 7. Lulea, p. 139- 145. * Baase, R. A. , Diment, W. D. , and Petrina, A. J. , â€Å"Sublevel Caving at Craigmont Mines Ltd. â€Å", Underground Mining Methods Handbook, W. A. Hustrulid, ed.. SME, New York, 1982, p. 898. Chatterjee, P. K. , Just, G. D. , and Ham, G. I.. ‘Sub-level caving simulation of 3000 pillar-recovery operation at Mount Isa mine. Australia† . Tram inst . min. Met.. Sect. A. , V. 88.. Oct. 1979, p. Al47-Al55. ——————————————————————————————————- 10 Author: Partha Das Sharma, E. mail: sharmapd1@gmail. com, Blog/Website: http://miningandblasting. wordpress. com/ Sublevel caving techniqueSimplicity and low cost are the essence * Cox, LA. , â€Å"Latest Developments and Draw Control in Sublevel Caving†, Trans. Int. Min Metall. , 1967, V. 76, p. A149-159. * Hustrulid. A. , â€Å"Sublevel Cave Mining at LKAB Kinina Mine†. iNCO presentation Aug. 1995. * Bull, G. and Page, C. H. (2000) Sublevel caving – today’s dependable low-cost ‘ore factory’, in Proceedings MassMin 2000, G. Chitombo (ed), 29 October to 2 November 2000, Brisbane, Australia, Australasian Institute of Mining and Metallurgy, Melbourne, pp. 537–556. * Hustrulid, W. and Kvapil, R. (2008) Sublevel Caving – past and future, in Proceedings 5th International Conference and Exhibition on Mass Mining, MassMin 2008, H. Schunnesson and How to cite Sub Level Caving, Papers

Friday, December 6, 2019

Conceptual Framework of Financial Reporting - MyAssignmenthelp.com

Questions: 1. What is your firms tax expense in its latest financial statements? 2. Is this figure the same as the company tax rate times your firms accounting income? Explain why this is, or is not, the case for your firm. 3. Comment on deferred tax assets/liabilities that is reported in the balance sheet articulating the possible reasons why they have been recorded. 4. Is there any current tax assets or income tax payable recorded by your company? Why is the income tax payable not the same as income tax expense? 5. Is the income tax expense shown in the income statement same as the income tax paid shown in the cash flow statement? If not why is the difference? 6. What do you find interesting, confusing, surprising or difficult to understand about the treatment of tax in your firms financial statements? 7. What new insights, if any, have you gained about how companies account for income tax as a result of examining your firms tax expense in its accounts? Answers: Answer 1 The annual report of JB Hi-Fi Company has reflected that owners equity, contributed equity, reserve and retained earnings have been considered. However, in order to save the tax payment to government, company has planned to increase the debt portion in its balance sheet. Owners equity is divided into three specific parts (Bekaert and Hodrick, 2017). The stakeholders equity section of JB HI FI Limited Include Contributed Equity Reserve Retained Earning Contributed capital also called Paid in capital. It is the amount of cash and other assets that shareholder had given to the corporation in exchange for stock. Contributed capital is an element of the total amount of equity recorded by an organisation. It can be shown in separate account within the stake holders equity section of the balance sheet. However, with the increase in the income, company has been paying increased total tax payment throughout the time. The equity capital investment in JB Hi-Fi Company has been increasing throughout the time. This level of business functioning and increasing equity capital of JB Hi-Fi Company will decrease the financial leverage and risk associated with the capital solvency of company. In 2013, JB Hi-Fi Company had AUD $ 243 million investment which has increased by somewhere around 400% in 2017 and shown equity capital of company AUD $ 854 million throughout the time (Brigham and Ehrhardt, 2013). Reserves are the portion of the businesss profit which has been set aside to strengthen the businesss financial position. Reserve is often used to purchase fixed assets, to repay debts, to fund expansion, bonuses and dividend repayment. There can be two kind of reserve Capital reserve and Revenue reserve. The retained earnings of a corporation are the accumulated net income of the corporation that is retained by the corporation at a particular point of time such as at the end of the reporting period. Retained earnings is the amount which has not been paid by company as dividend but retain by company which would be plugged back in business ,to pay dept. or can be utilise to grab new opportunity in business world. Equity (Amount in dollar million) ($M) 2017 2016 Contributed equity 438.7 49.3 Reserve 33.7 27.1 Retained earning 381.6 328.3 Total equity 853.5 404.7 Answer 2 JB Hi-Fi Company s tax expense in its latest financial statements It is evaluated that tax is the amount of money which is paid by the JB Hi-Fi Company to government. It is charged on the profit earned by company. However, by evaluating annual report of JB Hi-Fi Company, it is considered that company has been paying high tax amount and did not use proper capital structure to reduce its tax payment throughout the time (Cucchiella, Gastaldi and Trosini, 2017). Particular(AUD $ in million) 2016 2017 Income tax expenses 86.8 65.6 This above given table shows that company has decreased its tax payment throughout the time. In 2016, company was paying AUD $ 86.8 million tax payment which went down by 20% in 2017 and resulted to payment of tax of AUD $ 65.6 million. It is considered that company has increased the debt portion and interest payment. However, company has increased the overall return in 2017 as compared to last year. At the same time, company has increased the interest payment and other tax deductible expenses which reduced the tax payment throughout the time. In addition to this, in 2016, JB Hi-Fi Company was having AUD $ 7.8 million differed tax amount which has been reduced to zero (Deresky, 2017). Answer 3 Tax rate figure of the JB Hi-Fi Company and its comparison with the tax deduction from the overall accounting income After evaluating the annual report of company it is considered that firms tax expenses shown in the balance sheet is not the same amount of tax rate times firms accounting income. JB Hi-Fi Company has paid tax expenses AUD $ 65.6 million in 2017 which includes deferred tax amount as well. On the other hand, company tax rate times firms accounting income would be charged with the amount of accounting income *30% tax rate i.e. 259*30%= AUD $ 77.7 million. The total tax differences between firms tax expense in its latest financial statements and the company tax rate times firms accounting income is AUD $ 12.1 million. Reason for the differences between firms tax expense in its latest financial statements and the company tax rate times firms accounting income is the inclusion of deffered tax in balance sheet and differences between the treatment of taxation amount as per the accounting income and taxations rules and regulation. The divergence between these two taxes arises due to two main reasons. First is related to differences between items of revenue and expenses shown in the profit and loss account and the items which are noted as revenue, expenses and deduction for tax purpose. For instance, Depreciation accounting, bed debts accounting, recording of donations in financial statement is different as per the accounting and income tax provision which is given in AASB-112. In accordance with the matching concept, taxes on incomes are accrued in the same period as the revenue and the amount of expenses to which they relates. Answer 4 Deferred tax assets/liabilities that is reported in the balance sheet Deferred Tax The annual report of JB Hi-Fi Company has reflected that in its latest financial statements deferred tax liabilities $8.2 million. Deferred tax should be recognised and carried forward only to the extent that there is a reasonably certainty that sufficient future taxable income will be available against which such deferred tax assets can be realised. Yes JB HI FI Limited is having deferred tax liabilities in the year 2017, which is shown in the liabilities side of the balance sheet. In current practice companies in general prepare books of accounts as per Corporation Act and AASB. Accounting income and taxable income prepared are seldom same and that is the reason behind creating DTA/DTL. If accounting income is higher than the taxable income then it will be shown in the deferred assets side and if it is lower than the taxable income then it will be shown in the deferred tax liabilities. For instance, if company find that due the different between accounting and income tax provisions, if company has charged higher tax on its revenue and as per the accounting rules and regulation then all the excess tax payment will be shown on the assets side of the balance sheet as deferred assets. On the other hand, if company has charged lower tax on its revenue and as per the accounting rules and regulation as compared to tax accounting frameworks then all the short tax payment will be shown on the balance side of the balance sheet as deferred liabilities. Deferred tax amount is shown in the liabilities side of balance sheet will be considered as there is chances of paying tax amount to government in the future. Particular (AUD $ million) 2017 2016 Deferred tax liabilities 8.2 0 Answer 5 Current tax assets or income tax payable recorded by your company, This is the amount of tax payment charged on the profit of company. The current tax payable by company is AUD $ 4.9 million in 2016 which went up to AUD $ 9 million in 2017 (Elad, 2016). YES there is income tax payable recorded by JB Hi-Fi company with the amount of AUD $ 9 million. The company report income tax expenses in its income statement while income tax payable is the actual amount that the company owes in taxes, based on the rule of tax code. It appears on the balance sheet as a liability until the company actually pays the tax bill. In addition to this, deferred tax payment of company is AUD $ 8.5 million which have not been recognized by the company in that particular year. Particular(AUD $ in million) 2016 2017 Income tax payable 4.9 9 Why income tax expenses is not same as the income tax payable It is considered that Income tax expenses charged on profit of current years which is paid only on the current year profit. On the other hand, Income tax liabilities is the accumulation of outstanding tax expenses which covers all the past, present and future tax implication on the business of JB Hi-Fi company. Income tax expenses is the component of the profit and loss account and on other hand, income tax payable is part of the balance sheet. Answer 6 Cash flow statement is accompanied with the cash inflow and outflow of money in the particular year. Amount paid for income tax shown in cash flow statement is $98.5 million which includes all the tax payment by the company in current year. It may include tax payment related to past present and future tax implication of the company. On the other hand, income tax payment shown in the profit and loss account is the tax expenses charged on the profit and loss of company for the current year. Nonetheless, tax expenses paid and recorded in the profit and loss of the company is done as per the income tax rules AASB-122. On the other hand, cash flow statement reflects the total amount of cash outflow of income tax expenses recorded in the CFS of company. Income tax expenses shown in income statement are $ 86.8 million hence it is not the same. Income statement of company reflects the income and expenses of company occurred in the particular year. This amount is shown in the financial activi ties of cash flow of business. Therefore, after seeing the financial statement of company, it could be inferred that income tax expense shown in the income statement is not same as the income tax paid shown in the cash flow statement due the payment of income tax related to particular year and charged on the profit to the same year (Kundakchyan and Zulfakarova, 2014). Answer 7 Treatment of tax in your firms financial statements JB Hi-Fi Company has recorded its entire tax amount which is charged on the revenue as revenue expenses and shown in its income statement. Interesting thing about the recorded its entire tax a mount It is evaluated that JB Hi-Fi Company has recorded its all tax expenses on the basis of following proper IFRS rules and GAAP standards. The interesting thing about the recording of income tax payment by company in its books of account is done by considering its future and present implication of tax payment on the business (Laudon and Traver, 2013). Surprising thing about the recorded its entire tax a mount The main surprising thing about the JB Hi-Fi Company is related to blockage of funds in its business. It is evaluated that company has blocked more funds in its deferred tax payment which may increase the overall cost of capital and reduce the capital blockage in its business. This JB Hi-Fi Company is proactive in managing the tax payment by following double taxation avoidance agreement. It is considered that if company makes payment to government then with the same time, company reduce its deferred tax liabilities. Difficulty to understand It is evaluated that JB Hi-Fi Company has establish harmonization in its IFRS rules and GAAP standards while recording of its tax payment. It is considered that due to the complexity of the accounting rules and cumbersome recording process, it becomes hard for the stakeholders to bifurcate deferred tax payment and simple tax payment. After evaluating the IFRS rules, I have considered that I know all the rules and recording of tax payment then I could easily identify the areas which company could focus to reduce its tax payment. In addition to this, on the basis of this information, I could easily determine whether company is following proper corporate governance policies and frameworks to increase its overall outcomes. This level of understanding will help me to identify all the pros and cons of paying tax payment to government and its impact on the business efficiency of company. There is several tax planning methods which company should follow to reduce its tax burden and increase the efficiency of the business. In addition to this, company could also use the deferred tax payment to reduce its tax burden throughout the time. References Bekaert, G. and Hodrick, R., 2017.International financial management. Cambridge University Press. Brigham, E.F. and Ehrhardt, M.C., 2013.Financial management: Theory practice. Cengage Learning. Cucchiella, F., DAdamo, I. and Gastaldi, M., 2015. Financial analysis for investment and policy decisions in the renewable energy sector.Clean Technologies and Environmental Policy,17(4), pp.887-904. Cucchiella, F., Gastaldi, M. and Trosini, M., 2017. Investments and cleaner energy production: A portfolio analysis in the Italian electricity market.Journal of Cleaner Production,142, pp.121-132. Deresky, H., 2017.International management: Managing across borders and cultures. Pearson Education India. Dinnie, K., 2015.Nation branding: Concepts, issues, practice. Routledge. Draft, I.E., 2015. Conceptual Framework for Financial Reporting.2015-05-01)[2015-07-20]. https://kjs. mof. gov. cn/zhengwuxinxi/gongzuotongzhi/201506 P. Elad, C., 2016. International Classification of Financial Reporting, Christopher W. Nobes. Routledge, Abington, UK (2014),(160 pages, 95), ISBN: 0415736935. Garrett, J., Hoitash, R. and Prawitt, D.F., 2014. Trust and financial reporting quality.Journal of Accounting Research,52(5), pp.1087-1125. JB HI-FI, 2017, annual report, Retrieved on 29th November, 2017 from https://www.annualreports.com/HostedData/AnnualReports/PDF/ASX_JBH_2016.pdf Kundakchyan, R.M. and Zulfakarova, L.F., 2014. Current issues of optimal capital structure based on forecasting financial performance of the company.Life Science Journal,11(6s), pp.368-371. Laudon, K.C. and Traver, C.G., 2013.E-commerce. Pearson.

Friday, November 29, 2019

Mr Khan free essay sample

Assume the room is well sealed and heavily insulated. 2. An ideal Otto cycle has a compression ratio of 9. 2 and uses air as the working fluid. At the beginning of the compression process, air is at 98 kPa and 27oC. The pressure is doubled during the constant-volume heat-addition process. Accounting for the variation of specific heats with temperature, determine (a) the amount of heat transferred to the air, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. . A gas turbine power plant uses solar energy as the source of heat addition (see Figure for detailed setup and operating data). Modelling the cycle as a Brayton cycle and assuming no pressure drops in the heat exchanger or interconnecting piping, determine: (a) the thermal efficiency; (b) the air mass flow rate, in kg/s, for a net power output of 500kW. 4. Steam is the working fluid in an ideal reheat Rankine cycle. We will write a custom essay sample on Mr Khan or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Steam enters the first-stage turbine at 8. 0 MPa, 480oC, and expands to 0. 7 MPa. It is then reheated to 440oC before entering the secondstage turbine, where it expands to the condenser pressure of 0. 008 MPa. The net power output is 100 MW. Determine (a) the thermal efficiency of the cycle, (b) the mass flow rate of steam, in kg/h, (c) the rate of heat transfer out from the condensing steam as it passes through the condenser, in MW. Discuss the effects of reheat on the vapor power cycle. NOTE: Do the problems in a systematic way. Include the units in the calculations. State any assumptions.